White papers

The following white papers are available.

• The whitepaper How to integrate FMEA, Control Planning and SPC shows how you can really implement a working quality system where the 3 techniques come together.
• The white paper SPC and SQC integrated explains how you can combine SPC and SQC in an organisation to get the best of both worlds.
• The whitepaper Integrating SPC and TPM  (OEE) shows how you can integrate the two continuous improvement methods
• The white paper managing control limits describes how to set control limits during the implementation of SPC to make sure the organization can handle the number of out of controls
• The white paper recalculating the control limits recommends the use of 2 new indices to allow a quick and effective comparison between limits set historically and the current process
• The white paper Using control charts for quality improvement shows how SPC (control charts) can be used as a tool to support process improvement
• During SPC implementation often too much emphasis is put on the use of the average chart. The whitepaper Importance of the range chart explains mistakes made in this area and gives recommendations how  to prevent these mistakes
• The paper Parallel processes and SPC describes which issues are important when you implement SPC in processes where you have parallel subprocesses like multiple cavities, multiple lanes etc
• In the paper tracking and tracing it is explained how you can implement full tracking and tracing and how you can use DataLyzer to quickly analyse causes of variation 
• In the white paper SPC in Crystalline PV module manufacturing we explain how you can benefit from implementing DataLyzer Spectrum. Please send us a mail if you like to receive this white paper.